Ex) Article Title, Author, Keywords

Ex) Article Title, Author, Keywords

Progress in Medical Physics 2020; 31(3): 54-62

**Published online** September 30, 2020 https://doi.org/10.14316/pmp.2020.31.3.54

Copyright © Korean Society of Medical Physics.

Dong Wook Kim , Kwangwoo Park , Hojin Kim , Jinsung Kim

**Correspondence to:**Dong Wook Kim

(kdw1026@yuhs.ac)

Tel: 82-2-2228-4363

Fax: 82-2-2227-7823

This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Dose calculation algorithms play an important role in radiation therapy and are even the basis for optimizing treatment plans, an important feature in the development of complex treatment technologies such as intensity-modulated radiation therapy. We reviewed the past and current status of dose calculation algorithms used in the treatment planning system for radiation therapy. The radiation-calculating dose calculation algorithm can be broadly classified into three main groups based on the mechanisms used: (1) factor-based, (2) model-based, and (3) principlebased. Factor-based algorithms are a type of empirical dose calculation that interpolates or extrapolates the dose in some basic measurements. Model-based algorithms, represented by the pencil beam convolution, analytical anisotropic, and collapse cone convolution algorithms, use a simplified physical process by using a convolution equation that convolutes the primary photon energy fluence with a kernel. Model-based algorithms allowing side scattering when beams are transmitted to the heterogeneous media provide more precise dose calculation results than correction-based algorithms. Principle-based algorithms, represented by Monte Carlo dose calculations, simulate all real physical processes involving beam particles during transportation; therefore, dose calculations are accurate but time consuming. For approximately 70 years, through the development of dose calculation algorithms and computing technology, the accuracy of dose calculation seems close to our clinical needs. Next-generation dose calculation algorithms are expected to include biologically equivalent doses or biologically effective doses, and doctors expect to be able to use them to improve the quality of treatment in the near future.

**Keywords**Dose, Algorithm, Radiation, Oncology, Planning

The main goal of radiotherapy is to deliver the prescribed dose accurately to malignant tumors while minimizing the dose to adjacent normal organs. To achieve this goal, optimizing the direction, amount, and distribution of the radiation to be irradiated to the patient is necessary. This optimization process is called radiation treatment planning, which is implemented through a treatment planning system (TPS). By using a TPS, we plan and simulate treatment before the radiation beam is delivered to the tumor. During treatment planning, ensuring that the doses prescribed for safe and quality treatment are properly targeted to the tumor or do not exceed the excess dose in normal organs is necessary. Therefore, the radiation TPS must accurately present the calculated radiation dose values to the tumor and surrounding normal organs, and accordingly, an important element in a TPS would be an accurate calculation of radiation dose.

Radiation dose is the total amount of ionizing radiation energy absorbed by a material or tissue. Dose calculation is computing the energy absorbed by the media, and dose calculation algorithms are the fundamental tools to facilitate this process. Dose calculation algorithms should be able to provide results quickly so that the treatment planning process can be completed within a clinically acceptable time range, and these results must be accurate enough to establish a correlation between the delivered dose and the clinician. The collision of “high speed” and “high accuracy” is an important challenge in developing modern dose calculation algorithms.

Before the 1920s, the universal concept of dose was not established, and medical physicists decided to investigate the dose to the patient by calculating the exposure time of the X-ray machine. By the 1920s, the energy of the X-ray units had sufficient energy to treat at depth, introducing the concept of depth-dose, iso-dose, and opposing-beam techniques. The concept of treatment planning was introduced between the 1920s and 1950s, and dose calculations were performed manually. In the 1950s and 1960s, dose distribution calculations were performed for the first time using a computer and dose calculations considered multiple planes and the internal anatomy. With the prevalence of computed tomography (CT) in the 1970s, three-dimensional (3D) dose calculations became possible, and accordingly, the treatment plan S/W was rapidly developed. Since then, intensity-modulated radiation therapy for optimizing radiation therapy has been introduced, and various techniques for accurate dose calculation for non-homogeneous areas in patients have been employed, and advances in computer science have made providing complex and accurate dose calculation results in a short time possible. Dose calculation algorithms used in radiation therapy have been rapidly evolving by rapid advances in particle/nuclear physics and computer science. These advances have been achieved by the improved understanding of the physical processes involved in the interaction between the beam particle medium and increased speed of computer-based simulation and dose calculation. From the history of dose calculations and mechanisms used in the radiotherapy field, we can classify dose calculation algorithms into three major categories. The first category is called factor-based algorithms, which use semiempirical approaches to resolve tissue heterogeneity and surface curvature based on effective spatial dose measures such as depth, field boundaries, and path lengths in water. The second category is called model-based algorithms, which predict patient dose distributions from the primary particle fluence and a dose kernel. The third category is Monte Carlo simulations, which calculate dose distributions based on computer simulations of the physical process of the particle in matter.

In a factor-based algorithm, measuring the absorbed dose in a water phantom from various rectangular beams normally incident on the phantom surface is important. All measured data are parameterized by the absorbed dose distribution as a function of source center distance, field size, depth, and side position. Then, the factors are applied posteriorly to the measurements to consider the phantom settings and the fact that the patient’s specific surface (block, compensator, etc.) and the patient’s surface are not flat and the patient’s tissue is not water. Most factor-based algorithms provide approximations by using interpolation and extrapolation based on data from direct measurements for various treatment conditions and by considering the difference in attenuation as a result of the beam passing through a heterogeneous tissue. Factor-based dose calculations have been traditionally used in situations where patient treatment investigation conditions do not differ significantly from the measurement conditions used for commissioning or where heterogeneity correction is considered insignificant. Representative examples of these algorithms used in the early days are Clarkson’s technology and IRREG, which are still used for manual dose calculations and in some commercial software for secondhand dose checks [1 -3]. For the inhomogeneity correction, it can be broadly divided into two categories: one is a one-dimensional density sampling method and the other is a 3D density sampling method. Typical one-dimensional density sampling methods are a linear attenuation method, an effective attenuation coefficient method, a ratio of tissue–air ratios (RTAR) method, and a power law method. A linear attenuation method is the simplest form of inhomogeneity correction to adjust the dose at point based on the overlying thickness of inhomogeneity by using a “percent per cm” correction [4]. The inhomogeneity correction factor (ICF) is presented as follows using a linear attenuation method:

An effective attenuation coefficient method is similar to a linear attenuation method but uses an effective attenuation coefficient instead of a “percent per cm” correction as follows:

where

where

where ρ^{1} is the relative electron density of the medium at the point where the calculation lies, ρ^{2} is the relative electron density of the overlying material, ^{1} is the depth within this medium, and ^{2} is the distance to the upper surface of overlying material. After the 1980s, Webb et al. extended this method to be adapted for the tissue density in CT as follows:

where ^{th}_{μ} is the electron density of the ^{th}_{en} / ρ)_{N} is the mass absorption coefficient of the material in layer ^{60}Co, modifying the formula systematically by adding the buildup distance _{m} instead of _{m} to all depths in the buildup area is necessary. This method provides an acceptable approximation for a single inhomogeneous layer with a larger field size and lesser electron density less than those of tissue.

All of the aforementioned methods in the first category were developed in the era of using photon beams with a lower energy than ^{60}Co for radiation therapy; therefore, an approximation of the electron balance was acceptable, and thus, TAR data could be used and adjusted directly. However, these methods have a weakness that extending to situations where there is no electron equilibrium is difficult [12 -17].

The second category for the inhomogeneity correction consists of the equivalent tissue–air ratio (ETAR), differential tissue–air ratio (dTAR), and 3D beam subtraction (3D-BSM) methods. The ETAR method was introduced in the late 1970s as the practical dose calculation method using the full CT data set for computerized treatment planning systems [18,19]. The ETAR method with an inhomogeneous medium is given by the following equation:

where

where _{ij}_{i}_{j}_{i}_{j}^{w}_{0}(_{i}_{j}_{ij}_{i}_{j}

This “factor-based algorithm” has the advantage that the dose calculation speed is quick and distinguishing the subsequent energy transfer by photons and electrons in the patient’s body is not needed. However, this algorithm has less accuracy for a heterogeneous body with energy greater than 6 MV, where the scattering contribution is less significant and the effects of electron motion caused by photons can locally lead to high dose changes.

Model-based algorithms are a widely and predominantly used dose calculation concept in currently commercially available treatment planning systems [23 -30]. These algorithms model the radiation output such as “primary energy fluence” of the photon from the treatment machine before the energy absorption process is considered. These models are calibrated to measure data using simple treatment fields in water. Then, the modeled energy fluence of the primary photons is used to calculate the energy release and transport into the patient’s body. All model-based algorithms have two essential components: one is the total energy released per unit mass (TERMA), which is the energy released to the medium by interactions of the primary photons emerging from the linear accelerator (LINAC) [28]. The TERMA at the interaction point of the primary photons

where

which is called the “superposition” method. However, this method is too sophisticated and requires much computational effort. To reduce the computational power required for the superposition method, the convolution approach was proposed by changing the kernel to the function of the distance between the interaction points

This well-known method for accurate dose calculation in an inhomogeneous medium is called the convolution/superposition method. Several algorithms distinguished by the convolution kernel treats exist, such as the pencil beam convolution (PBC) algorithm, analytical anisotropic algorithm (AAA) (Varian Medical System, Inc., Palo Alto, CA, USA), and collapse cone convolution (CCC) algorithm (Pinnacle, CMS XiO, etc.) [24,30,31,33 -35]. For homogeneous media such as water, the accuracy does not depend much on calculation algorithms. For heterogeneous media, the difference in the accuracy of dose calculation is determined by how well the kernels of these algorithms can simulate the actual scattering. The 3D pencil beam-type dose calculation, the so-called “differential pencil beam”, was introduced by Mohan et al. in 1986 [31]. A pencil beam is a dose kernel presenting the 3D dose distribution of an infinitely narrow mono-energetic photon beam in water. The PBC algorithm assumes that all points of interaction are on the central axis of the pencil beam and does consider the lateral scattering to be homogeneous; thus, inhomogeneity correction is considered only in the longitudinal direction. The value of TERMA is calculated from the scaling of the path length by the ratio of relative electron density between tissue and water in a heterogeneous medium. The values of the pencil beam kernel in water are used according to the radiological path length calculated along the central axis of the pencil beam. For the AAA and CCC algorithm, these methods consider the inhomogeneous effect of both the longitudinal and lateral directions unlike the PBC algorithm. The AAA was implemented in Eclipse (Varian Medical System, Inc.). The AAA employs spatially variant MC-derived convolution scatter kernels and has separate modeling for primary photons, scattered extra-focal photons, and contamination electrons. For the inhomogeneity consideration, the AAA is handled using radiological scaling of the dose deposition in the beamlet direction and electron-density-based scaling of the photon scatter kernels in the lateral direction. The doses are obtained by superposing the doses from the photon and electron convolution. The advantage of the AAA is its relatively short calculation time and accuracy comparable to the CCC algorithm and better than the PBC algorithm [36 -38]. The CCC method is proposed by Ahnesjo in 1989, which uses poly-energetic energy deposition kernels from a spectrum beam by calculating from the database of mono-energetic kernels [27]. In the CCC algorithm, the kernel is represented analytically and expressed in polar coordinates, which consist of a finite number of polar angles for the primary beam. The point of interaction can be considered to be at the apex of a set of radially directed lines spread out in three dimensions, and each line is considered to be the axis of a cone. The kernel along each line is the energy deposited within the entire cone collapsed onto the line. The advantage of the CCC algorithm over standard convolution algorithms is that it can reduce the computation resources. The computation time for the CCC method in an inhomogeneous medium is proportional to MN^{3} as opposed to N^{6}, where M is the number of cones and N is the number of voxels along one side of the calculation volume. The CCC algorithm was applied to Pinnacle (Philips Inc., Amsterdam, Netherlands), Oncentra MasterPlan (Nucletron, Inc., Columbia, MD, USA), CMS XiO (Elekta AB, Stockholm, Sweden), RayStation (RaySearch Laboratories AB, Stockholm, Sweden), etc.

Model-based algorithms are more accurate than factor-based algorithms, especially in inhomogeneous media, but still rely on approximations and only partially handle the physical processes involved in the microscopic absorption of the energy transferred by the radiation field.

Principle-based algorithms, commonly known as Monte Carlo algorithms, are the most sophisticated approach that includes almost all known physical features for microscopic radiation–tissue interactions. Monte Carlo algorithms are a stochastic method and have been widely used in the field of experimental particle physics, and in the clinical field, they were initially used as a benchmark to verify the accuracy of other dose calculation algorithms [39 -42]. Usually, a Monte Carlo dose calculation algorithm consists of two major steps that are initiated by a random number seed generation: first, the simulation of the radiation beam travels through the accelerator gantry head and other parts before the patient’s body. Second, the energy absorption and transport inside the patient body’s including immobilization tools and bolus are simulated. Monte Carlo modeling is often performed in situations where physical measurements are difficult or impossible. Monte Carlo algorithms could “synthetically measure” significant but almost immeasurable quantities such as the contribution of dose from different orders of photon scattering. Many researchers performed Monte Carlo simulations to model the accelerator heads, generate the energy spectra and angular distributions of primary photon beams produced, and study other characteristics of photon beams [43 -45]. In the case of Monte Carlo simulations, accurate charged particle transport is important in a heterogeneous environment because charged particles set in motion from one side of the interface can move to accumulate energy. Inadequate treatment of charged particle transport will result in inaccurate prediction of the resultant. Monte Carlo algorithms simulate all real physical processes involving beam particles during transportation; therefore, the dose calculation results are expected to be accurate, but there are weaknesses in some areas. In order for a Monte Carlo algorithm to give accurate results, it must first have correct and detailed geometry information for the accelerator head, followed by fine and precise tuning by comparing the measured result values with the Monte Carlo calculation results. In addition, the accuracy of Monte Carlo calculation results is mainly determined by the number of events generated. This statistical uncertainty is proportional to the inverse square root of the generated event numbers [46]. Therefore, Monte Carlo dose calculations are rather slow and time consuming. The rapid development of computer central processing units and the introduction of graphics processing units have greatly improved the speed of Monte Carlo dose calculations, making it possible to apply them to the clinical field [47,48]. Alternatively, the Acuros XB algorithm in Eclipse was proposed to simulate all the physical processes by using a group of Boltzmann transport equations to describe all the physical processes involved, and these equations are solved using numerical methods using a computer, which is much faster than Monte Carlo algorithms but still provides an accuracy comparable to Monte Carlo algorithms [49 -52]. In 2018, Chopra et al. [53] reported the accuracy of five dose calculation algorithms within three treatment planning systems: Brainlab’s iPlan 4.2 (BL: PBC and MC [Monte Carlo]), Philips’ Pinnacle (PL: CCC), and Varian’s Eclipse (VR: AAA and Acuros XB). They found that BL:MC and measured doses agreed well (D_{diff} < 3%) for all field sizes and depths. In contrast, BL:PBC showed significant over-prediction of the measured dose for a lung phantom. They showed that PL:CCC has the best agreement with measured data compared with other TPS algorithms. In addition, VR:AAA over-predicted the measured results and was unable to replicate dose variations near heterogeneities, whereas Acuros XB showed good agreement with the measurements for heterogeneous media. Recently, many studies have focused on increasing the computation speed of Monte Carlo dose calculation algorithms. In 2020, David et al. [54] reported the clinical validation of a Monte Carlo dose engine. According to them, timing studies demonstrated that volumetric modulated arc therapy planning was completed in less than 4 minutes.

Dose calculation algorithms play an important role in radiation therapy. This article described various dose calculation algorithms used in treatment planning systems for radiation therapy from the past to the present. The radiation-calculating dose calculation algorithm is broadly classified into three main groups based on the mechanisms used: (1) factor-based, (2) model-based, and (3) principle-based. The PBC algorithm is still used in many places because it generates dose distributions with excellent precision and provides the best tradeoff between accuracy and calculation times in homogeneous regions, such as the brain and abdomen. However, the general applicability of the PBC algorithm in inhomogeneous environment is questionable. In cases of severe tissue inhomogeneities, convolution/superposition methods such as the “AAA” and “CCC” algorithm produce fairly accurate dose distributions even if minor differences are observed in comparison with Monte Carlo calculations. Due to the relatively fast dose calculation speed and high accuracy for both homogeneous and heterogeneous cases, convolution/superposition methods are now a major part of radiation therapy treatment planning systems. In the meantime, some Monte Carlo-based programs offer computational times similar to those of superimposition algorithms. The clinical applicability of principle-based algorithms has been steadily increasing due to advances in computer hardware and software and will be further developed in the future. Much effort has been done to evaluate dose calculation algorithms, and the accuracy hierarchy is reported as follows: principle-based methods>model-based methods (CCC>AAA>PBC)>factor-based methods. For approximately 70 years, through the development of dose calculation algorithms and computing technology, the accuracy of dose calculation seems close to our clinical needs. Next-generation dose calculation algorithms are expected to include biologically equivalent doses or biologically effective doses, and doctors expect to be able to use them to improve the quality of treatment in the near future.

This work was supported by the General Researcher Program (NRF- 2018R1D1A1B0705021713) through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT & Future Planning; the Startup Growth Technology Development Program (No.S2796688) through the Business for Cooperative R&D between Industry, Academy, and Research Institute funded by the Small and Medium Business Administration; the Nuclear Safety Research Program (No. 2003013-0120-SB120) through the Korea Foundation of Nuclear Safety (KOFONS), using the financial resource granted by the Nuclear Safety and Security Commission (NSSC), Republic of Korea.

The authors have nothing to disclose.

All relevant data are within the paper and its Supporting Information files.

Conceptualization: Dong Wook Kim. Supervision: Jinsung Kim. Validation: Kwangwoo Park and Hojin Kim. Writing–original draft: Dong Wook Kim, Kwangwoo Park, and Hojin Kim. Writing–review & editing: Dong Wook Kim and Jinsung Kim.

- Khan FM, Levitt SH, Moore VC, Jones TK Jr. Computer and approximation methods of calculating depth dose in irregularly shaped fields. Radiology. 1973;106:433-436.
- Cunningham JR. Scatter-air ratios. Phys Med Biol. 1972;17:42-51.
- Clarkson JR. A note on depth doses in fields of irregular shape. Br Inst Radiol. 1941;14:4.
- O'Connor JE. A transit dose technique for the determination of doses in inhomogeneous bodies. Br J Radiol. 1956;29:663-667.
- Johns HE. The physics of radiation therapy. Almancil: Springfield; 1953.
- Johns HE, Bruce WR, Reid WB. The dependence of depth dose on focal skin distance. Br J Radiol. 1958;31:254-260.
- Young MEJ. Radiological physics. London: Lewis; 1967.
- Weinkam J, Sterling T. A versatile system for three-dimensional radiation dose computation and display, RTP. Comput Programs Biomed. 1972;2:178-191.
- Holt JG, Laughlin JS, Moroney JP. The extension of the concept of tissue-air ratios (TAR) to high-energy x-ray beams. Radiology. 1970;96:437-446.
- Batho HF. Lung corrections in cobalt 60 beam therapy. J Can Assoc Radiol. 1964;15:79-83.
- Young ME, Gaylord JD. Experimental tests of corrections for tissue inhomogeneities in radiotherapy. Br J Radiol. 1970;43:349-355.
- Van Dyk J, Battista JJ, Rider WD. Half body radiotherapy: the use of computed tomography to determine the dose to lung. Int J Radiat Oncol Biol Phys. 1980;6:463-470.
- Van Dyk J, Keane TJ, Kan S, Rider WD, Fryer CJ. Radiation pneumonitis following large single dose irradiation: a re-evaluation based on absolute dose to lung. Int J Radiat Oncol Biol Phys. 1981;7:461-467.
- Yuen K, Kornelsen RO. Practical application of the differential Batho method for inhomogeneity correction on kerma in a photon beam. Med Phys. 1988;15:74-77.
- Iwasaki A. A method of taking into account the inhomogeneity backscatter contribution to the Batho correction factor. Phys Med Biol. 1986;31:923-926.
- Shimm DS, Doppke KP, Leong JC, Gregory E, Dosoretz DE. Variation in the lung inhomogeneity correction factor with beam energy. Clinical implications. Acta Radiol Oncol. 1985;24:407-410.
- Tang WL, Khan FM, Gerbi BJ. Validity of lung correction algorithms. Med Phys. 1986;13:683-686.
- Sontag MR, Cunningham JR. Clinical application of a CT based treatment planning system. Comput Tomogr. 1978;2:117-130.
- Sontag MR, Cunningham JR. The equivalent tissue-air ratio method for making absorbed dose calculations in a heterogeneous medium. Radiology. 1978;129:787-794.
- Kappas K, Rosenwald JC. Theoretical and experimental analysis of scatter from inhomogeneous slabs in a 60Co beam: the differential tissue-air ratio method (DTAR). Phys Med Biol. 1986;31:1211-1228.
- Kappas K. heterogeneites dans les faisceaux de photons de haute energie employes en radiotherapie: recherches experimentales et theoriques [Inhomogeneities in high energy photon beams used in radiotherapy. Experimental and theoretical studies]. Toulouse: Univ Paul Sabatier de Toulouse; 1986. Portuguese.
- Kappas K, Rosenwald JC. A 3-D beam subtraction method for inhomogeneity correction in high energy X-ray radiotherapy. Radiother Oncol. 1986;5:223-233.
- Hogstrom KR, Mills MD, Almond PR. Electron beam dose calculations. Phys Med Biol. 1981;26:445-459.
- Schoknecht G, Khatib M. [Model calculations of the Energy distribution of scattered radiation in a patient (author's transl)]. Rontgenblatter. 1982;35:303-306. German.
- Mackie TR, Scrimger JW, Battista JJ. A convolution method of calculating dose for 15-MV x rays. Med Phys. 1985;12:188-196.
- Scholz C, Schulze C, Oelfke U, Bortfeld T. Development and clinical application of a fast superposition algorithm in radiation therapy. Radiother Oncol. 2003;69:79-90.
- Ahnesjö A. Collapsed cone convolution of radiant energy for photon dose calculation in heterogeneous media. Med Phys. 1989;16:577-592.
- Ahnesjö A, Andreo P, Brahme A. Calculation and application of point spread functions for treatment planning with high energy photon beams. Acta Oncol. 1987;26:49-56.
- Patents in the Field of Medicine. Can J Comp Med Vet Sci. 1941;5:246.
- Mackie TR, Bielajew AF, Rogers DW, Battista JJ. Generation of photon energy deposition kernels using the EGS Monte Carlo code. Phys Med Biol. 1988;33:1-20.
- Mohan R, Chui C, Lidofsky L. Differential pencil beam dose computation model for photons. Med Phys. 1986;13:64-73.
- Bortfeld T, Schlegel W, Rhein B. Decomposition of pencil beam kernels for fast dose calculations in three-dimensional treatment planning. Med Phys. 1993;20(2 Pt 1):311-318.
- Bourland JD, Chaney EL. A finite-size pencil beam model for photon dose calculations in three dimensions. Med Phys. 1992;19:1401-1412.
- Ahnesjö A, Saxner M, Trepp A. A pencil beam model for photon dose calculation. Med Phys. 1992;19:263-273.
- Sievinen J, Ulmer W, Kaissl W. . Palo Alto: Varian Medical System; 2005.
- Fogliata A, Nicolini G, Vanetti E, Clivio A, Cozzi L. Dosimetric validation of the anisotropic analytical algorithm for photon dose calculation: fundamental characterization in water. Phys Med Biol. 2006;51:1421-1438.
- Gray A, Oliver LD, Johnston PN. The accuracy of the pencil beam convolution and anisotropic analytical algorithms in predicting the dose effects due to attenuation from immobilization devices and large air gaps. Med Phys. 2009;36:3181-3191.
- Panettieri V, Barsoum P, Westermark M, Brualla L, Lax I. AAA and PBC calculation accuracy in the surface build-up region in tangential beam treatments. Phantom and breast case study with the Monte Carlo code PENELOPE. Radiother Oncol. 2009;93:94-101.
- Aarup LR, Nahum AE, Zacharatou C, Juhler-Nøttrup T, Knöös T, Nyström H, et al. The effect of different lung densities on the accuracy of various radiotherapy dose calculation methods: implications for tumour coverage. Radiother Oncol. 2009;91:405-414.
- Ma CM, Li JS, Pawlicki T, Jiang SB, Deng J, Lee MC, et al. A Monte Carlo dose calculation tool for radiotherapy treatment planning. Phys Med Biol. 2002;47:1671-1689.
- Webb S, Parker RP. A Monte Carlo study of the interaction of external beam X-radiation with inhomogeneous media. Phys Med Biol. 1978;23:1043-1059.
- Sterpin E, Tomsej M, De Smedt B, Reynaert N, Vynckier S. Monte carlo evaluation of the AAA treatment planning algorithm in a heterogeneous multilayer phantom and IMRT clinical treatments for an Elekta SL25 linear accelerator. Med Phys. 2007;34:1665-1677.
- Rogers DW, Faddegon BA, Ding GX, Ma CM, We J, Mackie TR. BEAM: a Monte Carlo code to simulate radiotherapy treatment units. Med Phys. 1995;22:503-524.
- DeMarco JJ, Solberg TD, Smathers JB. A CT-based Monte Carlo simulation tool for dosimetry planning and analysis. Med Phys. 1998;25:1-11.
- Lovelock DM, Chui CS, Mohan R. A Monte Carlo model of photon beams used in radiation therapy. Med Phys. 1995;22:1387-1394.
- Jeraj R, Keall P. The effect of statistical uncertainty on inverse treatment planning based on Monte Carlo dose calculation. Phys Med Biol. 2000;45:3601-3613.
- Huang JY, Dunkerley D, Smilowitz JB. Evaluation of a commercial Monte Carlo dose calculation algorithm for electron treatment planning. J Appl Clin Med Phys. 2019;20:184-193.
- Ma CMC, Chetty IJ, Deng J, Faddegon B, Jiang SB, Li J, et al. Beam modeling and beam model commissioning for Monte Carlo dose calculation-based radiation therapy treatment planning: report of AAPM Task Group 157. Med Phys. 2020;47:e1-e18.
- Vassiliev ON, Wareing TA, McGhee J, Failla G, Salehpour MR, Mourtada F. Validation of a new grid-based Boltzmann equation solver for dose calculation in radiotherapy with photon beams. Phys Med Biol. 2010;55:581-598.
- Kroon PS, Hol S, Essers M. Dosimetric accuracy and clinical quality of Acuros XB and AAA dose calculation algorithm for stereotactic and conventional lung volumetric modulated arc therapy plans. Radiat Oncol. 2013;8:149.
- Fogliata A, Nicolini G, Clivio A, Vanetti E, Cozzi L. Critical appraisal of Acuros XB and Anisotropic Analytic Algorithm dose calculation in advanced non-small-cell lung cancer treatments. Int J Radiat Oncol Biol Phys. 2012;83:1587-1595.
- Han T, Mikell JK, Salehpour M, Mourtada F. Dosimetric comparison of Acuros XB deterministic radiation transport method with Monte Carlo and model-based convolution methods in heterogeneous media. Med Phys. 2011;38:2651-2664.
- Chopra KL, Leo P, Kabat C, Rai DV, Avadham JS, Kehwar TS, et al. Evaluation of dose calculation accuracy of treatment planning systems in the presence of tissue heterogeneities. Ther Radiol Oncol. 2018;2:28.
- Adam DP, Liu T, Caracappa PF, Bednarz BP, Xu XG. New capabilities of the Monte Carlo dose engine ARCHER-RT: clinical validation of the Varian TrueBeam machine for VMAT external beam radiotherapy. Med Phys. 2020;47:2537-2549.

Progress in Medical Physics 2020; 31(3): 54-62

**Published online** September 30, 2020 https://doi.org/10.14316/pmp.2020.31.3.54

Copyright © Korean Society of Medical Physics.

Dong Wook Kim , Kwangwoo Park , Hojin Kim , Jinsung Kim

Department of Radiation Oncology, Yonsei Cancer Center, Yonsei University College of Medicine, Seoul, Korea

**Correspondence to:**Dong Wook Kim

(kdw1026@yuhs.ac)

Tel: 82-2-2228-4363

Fax: 82-2-2227-7823

This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Dose calculation algorithms play an important role in radiation therapy and are even the basis for optimizing treatment plans, an important feature in the development of complex treatment technologies such as intensity-modulated radiation therapy. We reviewed the past and current status of dose calculation algorithms used in the treatment planning system for radiation therapy. The radiation-calculating dose calculation algorithm can be broadly classified into three main groups based on the mechanisms used: (1) factor-based, (2) model-based, and (3) principlebased. Factor-based algorithms are a type of empirical dose calculation that interpolates or extrapolates the dose in some basic measurements. Model-based algorithms, represented by the pencil beam convolution, analytical anisotropic, and collapse cone convolution algorithms, use a simplified physical process by using a convolution equation that convolutes the primary photon energy fluence with a kernel. Model-based algorithms allowing side scattering when beams are transmitted to the heterogeneous media provide more precise dose calculation results than correction-based algorithms. Principle-based algorithms, represented by Monte Carlo dose calculations, simulate all real physical processes involving beam particles during transportation; therefore, dose calculations are accurate but time consuming. For approximately 70 years, through the development of dose calculation algorithms and computing technology, the accuracy of dose calculation seems close to our clinical needs. Next-generation dose calculation algorithms are expected to include biologically equivalent doses or biologically effective doses, and doctors expect to be able to use them to improve the quality of treatment in the near future.

**Keywords**: Dose, Algorithm, Radiation, Oncology, Planning

The main goal of radiotherapy is to deliver the prescribed dose accurately to malignant tumors while minimizing the dose to adjacent normal organs. To achieve this goal, optimizing the direction, amount, and distribution of the radiation to be irradiated to the patient is necessary. This optimization process is called radiation treatment planning, which is implemented through a treatment planning system (TPS). By using a TPS, we plan and simulate treatment before the radiation beam is delivered to the tumor. During treatment planning, ensuring that the doses prescribed for safe and quality treatment are properly targeted to the tumor or do not exceed the excess dose in normal organs is necessary. Therefore, the radiation TPS must accurately present the calculated radiation dose values to the tumor and surrounding normal organs, and accordingly, an important element in a TPS would be an accurate calculation of radiation dose.

Radiation dose is the total amount of ionizing radiation energy absorbed by a material or tissue. Dose calculation is computing the energy absorbed by the media, and dose calculation algorithms are the fundamental tools to facilitate this process. Dose calculation algorithms should be able to provide results quickly so that the treatment planning process can be completed within a clinically acceptable time range, and these results must be accurate enough to establish a correlation between the delivered dose and the clinician. The collision of “high speed” and “high accuracy” is an important challenge in developing modern dose calculation algorithms.

Before the 1920s, the universal concept of dose was not established, and medical physicists decided to investigate the dose to the patient by calculating the exposure time of the X-ray machine. By the 1920s, the energy of the X-ray units had sufficient energy to treat at depth, introducing the concept of depth-dose, iso-dose, and opposing-beam techniques. The concept of treatment planning was introduced between the 1920s and 1950s, and dose calculations were performed manually. In the 1950s and 1960s, dose distribution calculations were performed for the first time using a computer and dose calculations considered multiple planes and the internal anatomy. With the prevalence of computed tomography (CT) in the 1970s, three-dimensional (3D) dose calculations became possible, and accordingly, the treatment plan S/W was rapidly developed. Since then, intensity-modulated radiation therapy for optimizing radiation therapy has been introduced, and various techniques for accurate dose calculation for non-homogeneous areas in patients have been employed, and advances in computer science have made providing complex and accurate dose calculation results in a short time possible. Dose calculation algorithms used in radiation therapy have been rapidly evolving by rapid advances in particle/nuclear physics and computer science. These advances have been achieved by the improved understanding of the physical processes involved in the interaction between the beam particle medium and increased speed of computer-based simulation and dose calculation. From the history of dose calculations and mechanisms used in the radiotherapy field, we can classify dose calculation algorithms into three major categories. The first category is called factor-based algorithms, which use semiempirical approaches to resolve tissue heterogeneity and surface curvature based on effective spatial dose measures such as depth, field boundaries, and path lengths in water. The second category is called model-based algorithms, which predict patient dose distributions from the primary particle fluence and a dose kernel. The third category is Monte Carlo simulations, which calculate dose distributions based on computer simulations of the physical process of the particle in matter.

In a factor-based algorithm, measuring the absorbed dose in a water phantom from various rectangular beams normally incident on the phantom surface is important. All measured data are parameterized by the absorbed dose distribution as a function of source center distance, field size, depth, and side position. Then, the factors are applied posteriorly to the measurements to consider the phantom settings and the fact that the patient’s specific surface (block, compensator, etc.) and the patient’s surface are not flat and the patient’s tissue is not water. Most factor-based algorithms provide approximations by using interpolation and extrapolation based on data from direct measurements for various treatment conditions and by considering the difference in attenuation as a result of the beam passing through a heterogeneous tissue. Factor-based dose calculations have been traditionally used in situations where patient treatment investigation conditions do not differ significantly from the measurement conditions used for commissioning or where heterogeneity correction is considered insignificant. Representative examples of these algorithms used in the early days are Clarkson’s technology and IRREG, which are still used for manual dose calculations and in some commercial software for secondhand dose checks [1 -3]. For the inhomogeneity correction, it can be broadly divided into two categories: one is a one-dimensional density sampling method and the other is a 3D density sampling method. Typical one-dimensional density sampling methods are a linear attenuation method, an effective attenuation coefficient method, a ratio of tissue–air ratios (RTAR) method, and a power law method. A linear attenuation method is the simplest form of inhomogeneity correction to adjust the dose at point based on the overlying thickness of inhomogeneity by using a “percent per cm” correction [4]. The inhomogeneity correction factor (ICF) is presented as follows using a linear attenuation method:

An effective attenuation coefficient method is similar to a linear attenuation method but uses an effective attenuation coefficient instead of a “percent per cm” correction as follows:

where

where

where ρ^{1} is the relative electron density of the medium at the point where the calculation lies, ρ^{2} is the relative electron density of the overlying material, ^{1} is the depth within this medium, and ^{2} is the distance to the upper surface of overlying material. After the 1980s, Webb et al. extended this method to be adapted for the tissue density in CT as follows:

where ^{th}_{μ} is the electron density of the ^{th}_{en} / ρ)_{N} is the mass absorption coefficient of the material in layer ^{60}Co, modifying the formula systematically by adding the buildup distance _{m} instead of _{m} to all depths in the buildup area is necessary. This method provides an acceptable approximation for a single inhomogeneous layer with a larger field size and lesser electron density less than those of tissue.

All of the aforementioned methods in the first category were developed in the era of using photon beams with a lower energy than ^{60}Co for radiation therapy; therefore, an approximation of the electron balance was acceptable, and thus, TAR data could be used and adjusted directly. However, these methods have a weakness that extending to situations where there is no electron equilibrium is difficult [12 -17].

The second category for the inhomogeneity correction consists of the equivalent tissue–air ratio (ETAR), differential tissue–air ratio (dTAR), and 3D beam subtraction (3D-BSM) methods. The ETAR method was introduced in the late 1970s as the practical dose calculation method using the full CT data set for computerized treatment planning systems [18,19]. The ETAR method with an inhomogeneous medium is given by the following equation:

where

where _{ij}_{i}_{j}_{i}_{j}^{w}_{0}(_{i}_{j}_{ij}_{i}_{j}

This “factor-based algorithm” has the advantage that the dose calculation speed is quick and distinguishing the subsequent energy transfer by photons and electrons in the patient’s body is not needed. However, this algorithm has less accuracy for a heterogeneous body with energy greater than 6 MV, where the scattering contribution is less significant and the effects of electron motion caused by photons can locally lead to high dose changes.

Model-based algorithms are a widely and predominantly used dose calculation concept in currently commercially available treatment planning systems [23 -30]. These algorithms model the radiation output such as “primary energy fluence” of the photon from the treatment machine before the energy absorption process is considered. These models are calibrated to measure data using simple treatment fields in water. Then, the modeled energy fluence of the primary photons is used to calculate the energy release and transport into the patient’s body. All model-based algorithms have two essential components: one is the total energy released per unit mass (TERMA), which is the energy released to the medium by interactions of the primary photons emerging from the linear accelerator (LINAC) [28]. The TERMA at the interaction point of the primary photons

where

which is called the “superposition” method. However, this method is too sophisticated and requires much computational effort. To reduce the computational power required for the superposition method, the convolution approach was proposed by changing the kernel to the function of the distance between the interaction points

This well-known method for accurate dose calculation in an inhomogeneous medium is called the convolution/superposition method. Several algorithms distinguished by the convolution kernel treats exist, such as the pencil beam convolution (PBC) algorithm, analytical anisotropic algorithm (AAA) (Varian Medical System, Inc., Palo Alto, CA, USA), and collapse cone convolution (CCC) algorithm (Pinnacle, CMS XiO, etc.) [24,30,31,33 -35]. For homogeneous media such as water, the accuracy does not depend much on calculation algorithms. For heterogeneous media, the difference in the accuracy of dose calculation is determined by how well the kernels of these algorithms can simulate the actual scattering. The 3D pencil beam-type dose calculation, the so-called “differential pencil beam”, was introduced by Mohan et al. in 1986 [31]. A pencil beam is a dose kernel presenting the 3D dose distribution of an infinitely narrow mono-energetic photon beam in water. The PBC algorithm assumes that all points of interaction are on the central axis of the pencil beam and does consider the lateral scattering to be homogeneous; thus, inhomogeneity correction is considered only in the longitudinal direction. The value of TERMA is calculated from the scaling of the path length by the ratio of relative electron density between tissue and water in a heterogeneous medium. The values of the pencil beam kernel in water are used according to the radiological path length calculated along the central axis of the pencil beam. For the AAA and CCC algorithm, these methods consider the inhomogeneous effect of both the longitudinal and lateral directions unlike the PBC algorithm. The AAA was implemented in Eclipse (Varian Medical System, Inc.). The AAA employs spatially variant MC-derived convolution scatter kernels and has separate modeling for primary photons, scattered extra-focal photons, and contamination electrons. For the inhomogeneity consideration, the AAA is handled using radiological scaling of the dose deposition in the beamlet direction and electron-density-based scaling of the photon scatter kernels in the lateral direction. The doses are obtained by superposing the doses from the photon and electron convolution. The advantage of the AAA is its relatively short calculation time and accuracy comparable to the CCC algorithm and better than the PBC algorithm [36 -38]. The CCC method is proposed by Ahnesjo in 1989, which uses poly-energetic energy deposition kernels from a spectrum beam by calculating from the database of mono-energetic kernels [27]. In the CCC algorithm, the kernel is represented analytically and expressed in polar coordinates, which consist of a finite number of polar angles for the primary beam. The point of interaction can be considered to be at the apex of a set of radially directed lines spread out in three dimensions, and each line is considered to be the axis of a cone. The kernel along each line is the energy deposited within the entire cone collapsed onto the line. The advantage of the CCC algorithm over standard convolution algorithms is that it can reduce the computation resources. The computation time for the CCC method in an inhomogeneous medium is proportional to MN^{3} as opposed to N^{6}, where M is the number of cones and N is the number of voxels along one side of the calculation volume. The CCC algorithm was applied to Pinnacle (Philips Inc., Amsterdam, Netherlands), Oncentra MasterPlan (Nucletron, Inc., Columbia, MD, USA), CMS XiO (Elekta AB, Stockholm, Sweden), RayStation (RaySearch Laboratories AB, Stockholm, Sweden), etc.

Model-based algorithms are more accurate than factor-based algorithms, especially in inhomogeneous media, but still rely on approximations and only partially handle the physical processes involved in the microscopic absorption of the energy transferred by the radiation field.

Principle-based algorithms, commonly known as Monte Carlo algorithms, are the most sophisticated approach that includes almost all known physical features for microscopic radiation–tissue interactions. Monte Carlo algorithms are a stochastic method and have been widely used in the field of experimental particle physics, and in the clinical field, they were initially used as a benchmark to verify the accuracy of other dose calculation algorithms [39 -42]. Usually, a Monte Carlo dose calculation algorithm consists of two major steps that are initiated by a random number seed generation: first, the simulation of the radiation beam travels through the accelerator gantry head and other parts before the patient’s body. Second, the energy absorption and transport inside the patient body’s including immobilization tools and bolus are simulated. Monte Carlo modeling is often performed in situations where physical measurements are difficult or impossible. Monte Carlo algorithms could “synthetically measure” significant but almost immeasurable quantities such as the contribution of dose from different orders of photon scattering. Many researchers performed Monte Carlo simulations to model the accelerator heads, generate the energy spectra and angular distributions of primary photon beams produced, and study other characteristics of photon beams [43 -45]. In the case of Monte Carlo simulations, accurate charged particle transport is important in a heterogeneous environment because charged particles set in motion from one side of the interface can move to accumulate energy. Inadequate treatment of charged particle transport will result in inaccurate prediction of the resultant. Monte Carlo algorithms simulate all real physical processes involving beam particles during transportation; therefore, the dose calculation results are expected to be accurate, but there are weaknesses in some areas. In order for a Monte Carlo algorithm to give accurate results, it must first have correct and detailed geometry information for the accelerator head, followed by fine and precise tuning by comparing the measured result values with the Monte Carlo calculation results. In addition, the accuracy of Monte Carlo calculation results is mainly determined by the number of events generated. This statistical uncertainty is proportional to the inverse square root of the generated event numbers [46]. Therefore, Monte Carlo dose calculations are rather slow and time consuming. The rapid development of computer central processing units and the introduction of graphics processing units have greatly improved the speed of Monte Carlo dose calculations, making it possible to apply them to the clinical field [47,48]. Alternatively, the Acuros XB algorithm in Eclipse was proposed to simulate all the physical processes by using a group of Boltzmann transport equations to describe all the physical processes involved, and these equations are solved using numerical methods using a computer, which is much faster than Monte Carlo algorithms but still provides an accuracy comparable to Monte Carlo algorithms [49 -52]. In 2018, Chopra et al. [53] reported the accuracy of five dose calculation algorithms within three treatment planning systems: Brainlab’s iPlan 4.2 (BL: PBC and MC [Monte Carlo]), Philips’ Pinnacle (PL: CCC), and Varian’s Eclipse (VR: AAA and Acuros XB). They found that BL:MC and measured doses agreed well (D_{diff} < 3%) for all field sizes and depths. In contrast, BL:PBC showed significant over-prediction of the measured dose for a lung phantom. They showed that PL:CCC has the best agreement with measured data compared with other TPS algorithms. In addition, VR:AAA over-predicted the measured results and was unable to replicate dose variations near heterogeneities, whereas Acuros XB showed good agreement with the measurements for heterogeneous media. Recently, many studies have focused on increasing the computation speed of Monte Carlo dose calculation algorithms. In 2020, David et al. [54] reported the clinical validation of a Monte Carlo dose engine. According to them, timing studies demonstrated that volumetric modulated arc therapy planning was completed in less than 4 minutes.

Dose calculation algorithms play an important role in radiation therapy. This article described various dose calculation algorithms used in treatment planning systems for radiation therapy from the past to the present. The radiation-calculating dose calculation algorithm is broadly classified into three main groups based on the mechanisms used: (1) factor-based, (2) model-based, and (3) principle-based. The PBC algorithm is still used in many places because it generates dose distributions with excellent precision and provides the best tradeoff between accuracy and calculation times in homogeneous regions, such as the brain and abdomen. However, the general applicability of the PBC algorithm in inhomogeneous environment is questionable. In cases of severe tissue inhomogeneities, convolution/superposition methods such as the “AAA” and “CCC” algorithm produce fairly accurate dose distributions even if minor differences are observed in comparison with Monte Carlo calculations. Due to the relatively fast dose calculation speed and high accuracy for both homogeneous and heterogeneous cases, convolution/superposition methods are now a major part of radiation therapy treatment planning systems. In the meantime, some Monte Carlo-based programs offer computational times similar to those of superimposition algorithms. The clinical applicability of principle-based algorithms has been steadily increasing due to advances in computer hardware and software and will be further developed in the future. Much effort has been done to evaluate dose calculation algorithms, and the accuracy hierarchy is reported as follows: principle-based methods>model-based methods (CCC>AAA>PBC)>factor-based methods. For approximately 70 years, through the development of dose calculation algorithms and computing technology, the accuracy of dose calculation seems close to our clinical needs. Next-generation dose calculation algorithms are expected to include biologically equivalent doses or biologically effective doses, and doctors expect to be able to use them to improve the quality of treatment in the near future.

This work was supported by the General Researcher Program (NRF- 2018R1D1A1B0705021713) through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT & Future Planning; the Startup Growth Technology Development Program (No.S2796688) through the Business for Cooperative R&D between Industry, Academy, and Research Institute funded by the Small and Medium Business Administration; the Nuclear Safety Research Program (No. 2003013-0120-SB120) through the Korea Foundation of Nuclear Safety (KOFONS), using the financial resource granted by the Nuclear Safety and Security Commission (NSSC), Republic of Korea.

The authors have nothing to disclose.

All relevant data are within the paper and its Supporting Information files.

Conceptualization: Dong Wook Kim. Supervision: Jinsung Kim. Validation: Kwangwoo Park and Hojin Kim. Writing–original draft: Dong Wook Kim, Kwangwoo Park, and Hojin Kim. Writing–review & editing: Dong Wook Kim and Jinsung Kim.

- Khan FM, Levitt SH, Moore VC, Jones TK Jr. Computer and approximation methods of calculating depth dose in irregularly shaped fields. Radiology. 1973;106:433-436.
- Cunningham JR. Scatter-air ratios. Phys Med Biol. 1972;17:42-51.
- Clarkson JR. A note on depth doses in fields of irregular shape. Br Inst Radiol. 1941;14:4.
- O'Connor JE. A transit dose technique for the determination of doses in inhomogeneous bodies. Br J Radiol. 1956;29:663-667.
- Johns HE. The physics of radiation therapy. Almancil: Springfield; 1953.
- Johns HE, Bruce WR, Reid WB. The dependence of depth dose on focal skin distance. Br J Radiol. 1958;31:254-260.
- Young MEJ. Radiological physics. London: Lewis; 1967.
- Weinkam J, Sterling T. A versatile system for three-dimensional radiation dose computation and display, RTP. Comput Programs Biomed. 1972;2:178-191.
- Holt JG, Laughlin JS, Moroney JP. The extension of the concept of tissue-air ratios (TAR) to high-energy x-ray beams. Radiology. 1970;96:437-446.
- Batho HF. Lung corrections in cobalt 60 beam therapy. J Can Assoc Radiol. 1964;15:79-83.
- Young ME, Gaylord JD. Experimental tests of corrections for tissue inhomogeneities in radiotherapy. Br J Radiol. 1970;43:349-355.
- Van Dyk J, Battista JJ, Rider WD. Half body radiotherapy: the use of computed tomography to determine the dose to lung. Int J Radiat Oncol Biol Phys. 1980;6:463-470.
- Van Dyk J, Keane TJ, Kan S, Rider WD, Fryer CJ. Radiation pneumonitis following large single dose irradiation: a re-evaluation based on absolute dose to lung. Int J Radiat Oncol Biol Phys. 1981;7:461-467.
- Yuen K, Kornelsen RO. Practical application of the differential Batho method for inhomogeneity correction on kerma in a photon beam. Med Phys. 1988;15:74-77.
- Iwasaki A. A method of taking into account the inhomogeneity backscatter contribution to the Batho correction factor. Phys Med Biol. 1986;31:923-926.
- Shimm DS, Doppke KP, Leong JC, Gregory E, Dosoretz DE. Variation in the lung inhomogeneity correction factor with beam energy. Clinical implications. Acta Radiol Oncol. 1985;24:407-410.
- Tang WL, Khan FM, Gerbi BJ. Validity of lung correction algorithms. Med Phys. 1986;13:683-686.
- Sontag MR, Cunningham JR. Clinical application of a CT based treatment planning system. Comput Tomogr. 1978;2:117-130.
- Sontag MR, Cunningham JR. The equivalent tissue-air ratio method for making absorbed dose calculations in a heterogeneous medium. Radiology. 1978;129:787-794.
- Kappas K, Rosenwald JC. Theoretical and experimental analysis of scatter from inhomogeneous slabs in a 60Co beam: the differential tissue-air ratio method (DTAR). Phys Med Biol. 1986;31:1211-1228.
- Kappas K. heterogeneites dans les faisceaux de photons de haute energie employes en radiotherapie: recherches experimentales et theoriques [Inhomogeneities in high energy photon beams used in radiotherapy. Experimental and theoretical studies]. Toulouse: Univ Paul Sabatier de Toulouse; 1986. Portuguese.
- Kappas K, Rosenwald JC. A 3-D beam subtraction method for inhomogeneity correction in high energy X-ray radiotherapy. Radiother Oncol. 1986;5:223-233.
- Hogstrom KR, Mills MD, Almond PR. Electron beam dose calculations. Phys Med Biol. 1981;26:445-459.
- Schoknecht G, Khatib M. [Model calculations of the Energy distribution of scattered radiation in a patient (author's transl)]. Rontgenblatter. 1982;35:303-306. German.
- Mackie TR, Scrimger JW, Battista JJ. A convolution method of calculating dose for 15-MV x rays. Med Phys. 1985;12:188-196.
- Scholz C, Schulze C, Oelfke U, Bortfeld T. Development and clinical application of a fast superposition algorithm in radiation therapy. Radiother Oncol. 2003;69:79-90.
- Ahnesjö A. Collapsed cone convolution of radiant energy for photon dose calculation in heterogeneous media. Med Phys. 1989;16:577-592.
- Ahnesjö A, Andreo P, Brahme A. Calculation and application of point spread functions for treatment planning with high energy photon beams. Acta Oncol. 1987;26:49-56.
- Patents in the Field of Medicine. Can J Comp Med Vet Sci. 1941;5:246.
- Mackie TR, Bielajew AF, Rogers DW, Battista JJ. Generation of photon energy deposition kernels using the EGS Monte Carlo code. Phys Med Biol. 1988;33:1-20.
- Mohan R, Chui C, Lidofsky L. Differential pencil beam dose computation model for photons. Med Phys. 1986;13:64-73.
- Bortfeld T, Schlegel W, Rhein B. Decomposition of pencil beam kernels for fast dose calculations in three-dimensional treatment planning. Med Phys. 1993;20(2 Pt 1):311-318.
- Bourland JD, Chaney EL. A finite-size pencil beam model for photon dose calculations in three dimensions. Med Phys. 1992;19:1401-1412.
- Ahnesjö A, Saxner M, Trepp A. A pencil beam model for photon dose calculation. Med Phys. 1992;19:263-273.
- Sievinen J, Ulmer W, Kaissl W. . Palo Alto: Varian Medical System; 2005.
- Fogliata A, Nicolini G, Vanetti E, Clivio A, Cozzi L. Dosimetric validation of the anisotropic analytical algorithm for photon dose calculation: fundamental characterization in water. Phys Med Biol. 2006;51:1421-1438.
- Gray A, Oliver LD, Johnston PN. The accuracy of the pencil beam convolution and anisotropic analytical algorithms in predicting the dose effects due to attenuation from immobilization devices and large air gaps. Med Phys. 2009;36:3181-3191.
- Panettieri V, Barsoum P, Westermark M, Brualla L, Lax I. AAA and PBC calculation accuracy in the surface build-up region in tangential beam treatments. Phantom and breast case study with the Monte Carlo code PENELOPE. Radiother Oncol. 2009;93:94-101.
- Aarup LR, Nahum AE, Zacharatou C, Juhler-Nøttrup T, Knöös T, Nyström H, et al. The effect of different lung densities on the accuracy of various radiotherapy dose calculation methods: implications for tumour coverage. Radiother Oncol. 2009;91:405-414.
- Ma CM, Li JS, Pawlicki T, Jiang SB, Deng J, Lee MC, et al. A Monte Carlo dose calculation tool for radiotherapy treatment planning. Phys Med Biol. 2002;47:1671-1689.
- Webb S, Parker RP. A Monte Carlo study of the interaction of external beam X-radiation with inhomogeneous media. Phys Med Biol. 1978;23:1043-1059.
- Sterpin E, Tomsej M, De Smedt B, Reynaert N, Vynckier S. Monte carlo evaluation of the AAA treatment planning algorithm in a heterogeneous multilayer phantom and IMRT clinical treatments for an Elekta SL25 linear accelerator. Med Phys. 2007;34:1665-1677.
- Rogers DW, Faddegon BA, Ding GX, Ma CM, We J, Mackie TR. BEAM: a Monte Carlo code to simulate radiotherapy treatment units. Med Phys. 1995;22:503-524.
- DeMarco JJ, Solberg TD, Smathers JB. A CT-based Monte Carlo simulation tool for dosimetry planning and analysis. Med Phys. 1998;25:1-11.
- Lovelock DM, Chui CS, Mohan R. A Monte Carlo model of photon beams used in radiation therapy. Med Phys. 1995;22:1387-1394.
- Jeraj R, Keall P. The effect of statistical uncertainty on inverse treatment planning based on Monte Carlo dose calculation. Phys Med Biol. 2000;45:3601-3613.
- Huang JY, Dunkerley D, Smilowitz JB. Evaluation of a commercial Monte Carlo dose calculation algorithm for electron treatment planning. J Appl Clin Med Phys. 2019;20:184-193.
- Ma CMC, Chetty IJ, Deng J, Faddegon B, Jiang SB, Li J, et al. Beam modeling and beam model commissioning for Monte Carlo dose calculation-based radiation therapy treatment planning: report of AAPM Task Group 157. Med Phys. 2020;47:e1-e18.
- Vassiliev ON, Wareing TA, McGhee J, Failla G, Salehpour MR, Mourtada F. Validation of a new grid-based Boltzmann equation solver for dose calculation in radiotherapy with photon beams. Phys Med Biol. 2010;55:581-598.
- Kroon PS, Hol S, Essers M. Dosimetric accuracy and clinical quality of Acuros XB and AAA dose calculation algorithm for stereotactic and conventional lung volumetric modulated arc therapy plans. Radiat Oncol. 2013;8:149.
- Fogliata A, Nicolini G, Clivio A, Vanetti E, Cozzi L. Critical appraisal of Acuros XB and Anisotropic Analytic Algorithm dose calculation in advanced non-small-cell lung cancer treatments. Int J Radiat Oncol Biol Phys. 2012;83:1587-1595.
- Han T, Mikell JK, Salehpour M, Mourtada F. Dosimetric comparison of Acuros XB deterministic radiation transport method with Monte Carlo and model-based convolution methods in heterogeneous media. Med Phys. 2011;38:2651-2664.
- Chopra KL, Leo P, Kabat C, Rai DV, Avadham JS, Kehwar TS, et al. Evaluation of dose calculation accuracy of treatment planning systems in the presence of tissue heterogeneities. Ther Radiol Oncol. 2018;2:28.
- Adam DP, Liu T, Caracappa PF, Bednarz BP, Xu XG. New capabilities of the Monte Carlo dose engine ARCHER-RT: clinical validation of the Varian TrueBeam machine for VMAT external beam radiotherapy. Med Phys. 2020;47:2537-2549.

June 2023

pISSN 2508-4445

eISSN 2508-4453

Formerly ISSN 1226-5829

Frequency: Quarterly